# LibreNMS and Raspberry Pi

**URL:** <https://forums.jasonloong.com/t/librenms-and-raspberry-pi/32>\
**Category:** Uncategorized\
**Tags:** technology\
**Created:** [May 11, 2020, 5:16am UTC](https://forums.jasonloong.com/t/librenms-and-raspberry-pi/32 "2020-05-11T05:16:38Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![jasonloong](https://forums.jasonloong.com/user_avatar/forums.jasonloong.com/jasonloong/32/8_2.png) [@jasonloong](https://forums.jasonloong.com/u/jasonloong)\
**Post date:** [May 11, 2020, 6:01am UTC](https://forums.jasonloong.com/t/librenms-and-raspberry-pi/32/3 "2020-05-11T06:01:11Z")

</div>

[https://www.networkshinobi.com/snmp-on-raspberry-pi/](https://www.networkshinobi.com/snmp-on-raspberry-pi/)

Try above post for the RPi, didn’t try on my RPi as its just for pure testing

If you want to make sure snmpd works

```
cd /etc/snmp/

# backup initial default snmpd.conf
mv snmpd.conf snmpd.conf.bck

nano snmpd.conf

```

In the new snmpd.conf, you can have just this one line of config  
`rocommunity pass_phrase`

Exit, Save, issue a restart to the snmpd service

`systemctl restart snmpd`

Check to see whether it has been started successfully

`systemctl status snmpd`

## Check via Terminal

In your LibreNMS container bash  
`docker exec -it librenms bash`

Run a snmpwalk to the device (substitute whether its v2c or v1 protocol)  
`snmpwalk -v 2c -c your-community-passphrase IP.HERE`

## Check via GUI (LibreNMS)

After you have added the Device, run some pre-checks to make sure Libre is able to discover the device

In your Device details page, middle right Gear Icon

 ![Screenshot 2020-05-11 at 1.39.18 PM](https://forums.jasonloong.com/uploads/default/original/1X/2027c7363f14b480581dd9561ecda150d11c5fc0.png)

Issue captures on all tabs, you should see lots of numbers, that means it has successfully polled data from your device via a manual snmpwalk (via the GUI)

 ![Screenshot 2020-05-11 at 1.40.08 PM](https://forums.jasonloong.com/uploads/default/original/1X/0fb324defccbe5c08bb1a96992b9e20609b205d9.png)

 ![Screenshot 2020-05-11 at 1.53.20 PM](https://forums.jasonloong.com/uploads/default/original/1X/b05e36c9a4d4c3cbaa6d69845f0bc7e050e2842c.png)

---

_[View the full topic](https://forums.jasonloong.com/t/librenms-and-raspberry-pi/32)._